Features

1. Max 400W Electrosurgical Generator, with mono-polar and bipolar function.

2. Nine working modes: pure cut，blend1, blend2, blend3, contact coag, forced coag, soft coag, bipolar coag, bipolar cut

3. The electrosurgical generator is used to control bleeding and surgical cutting in all general and open surgical procedures, such as the general surgery, thoracic surgery,

brain surgery, ENT surgery, etc.

4. With different audible and visual indication during the process of outputting.

5. Patient return electrode monitoring system and Power Peak System that provides

surgeons with improved performance at Lower power settings, minimizing the risk of

tissue damage.

6. Applicable for Prostate Vaporizing Surgical Operation (TUR), perfectly used under water. The electrosurgical generator can be cooperated with endoscope and laparoscope.

7. Pencil Remoting Output. The output power can be controlled by the add or subtract button on the remoting control pencil.

Configuration Sheet

Power Control Pencil (disposable)       5pcs

Electrosurgical Pad (disposable)        10pcs

Electrosurgical pad cable               1pc

Double footswitch                     1set

Bipolar Forceps with cable             1set

Tip clean sponge                      1pc

Technical Specifications

PARAMETER	SPECIFICATION
Power	220V±22V, 50Hz±1Hz (110V±11V, 50/60Hz)
Operating Frequency	a) Monopolar: 512KHz; b) Bipolar: 1024KHz
Power Rating	1100VA±10％
Nine Working Modes	Monopolar Cut	a) Pure cut: 1W～400W (Load 800Ω) b) Blend1: 1W～300W (Load 800Ω) c) Blend2: 1W～200W (Load 800Ω) d) Blend3: 1W～150W (Load 800Ω)
	Monopolar Coag	e) Spray Coag: 1W～100W (Load 800Ω) f) Forced Coag: 1W～120W (Load 800Ω) g) Soft Coag: 1W～120W (Load 800Ω)
	Bipolar	h) Bipolar Coagulation: 1W～70W (Load 200Ω) i) Bipolar Cut: 1W～120W (Load 200Ω)
	Power Consumption	≤1100VA