Technical Specifications


-Defibrillator type                   Manual, Synchronized, Asynchronized

-Out put waveform                Biphasic technology                                                                            

-Energy accuracy                  <+1%

-Energy selection                      0,3,5,7,10,20,30,50,100,200,300,360 Joule

(Nominal at a resistance of 50)

-Charging time                   Maximum 8 seconds to 360 Joules

-Paddles                 Reusable external adult paddles

(Pediatric paddles integrated)

Power Requirements

-AC Power supply                 110V, 60 Hz /220V, 50 Hz

-Vehicle Voltage          DC 12V

Internal Battery Backup

-Battery type                   Rechargeable lead-acid battery

-Charging time              Time-Minimum of 4 hours for full charging

-Battery charging        During AC Power Supply operation of the device

-Charging /Low Battery Indication      Red LED

-Battery Capacity        100% of the battery will provide 120 mins of monitoring; and 30 discharges at 360 joules


-LED Dimensions         10’diagonal

-Type                       High resolution true-color graphic LED


ECG lead: I, II, III, AVR, AVL, AVF, V1-V6, GND

S-T segment analysis: -2.0-2.0mv

Arrhythmia analysis: yes

Protection: With stand 4000vAc/50Hz voltage in isolation and work against electrosurgical knife and defibrillation


Measurement method: Thoracic impedance


Working mode: Manual/Automatic/stat (5 minutes)

Method: Automatic oscillation

Cuff type: standard Adult; optional Pediatric/Neonatal


Measurement range 20~45°C

Resolution 0.1°C

Pulse Oximetry (SpO2)

Display: Spo2 value, pulse histogram, waveform, Pulse

Range: 0~99%for adult, pediatric and neonatal patients

Probe: standard adult finger clip

Optional pediatric Y-type clip and neonatal wrap

Pulse Range

Pulse range: 0-255bpm

Standard Parameter & Configuration


Optional Parameter



Copyright © 2001-2017 ARI Medical Technology Co., Ltd. - ARI Medical Equipment Co., Ltd. All rights reserved