Products
-
- Operating Theatre Equipment
- OB/GYN Equipment
- Diagnostic Equipment
- Sterilizer (Autoclave)
- X-ray Series
- Laboratory Equipment
- Biological Microscope
- Spectrophotometer
- High Speed Centrifuge
- Low Speed Centrifuge
- High Speed Freeze Centrifuge
- Low Speed Freeze Centrifuge
- Special Centrifuge
- Thermostatic Bath
- Laboratory Shaker
- Laboratory Mixer
- Water Distiller
- Magnetic and Electric Stirrer
- Laboratory Incubator
- Dry Oven
- PH Meter
- Biological Safety Cabinet
- Clean Workbench
- Water Purifier
- Ultrasonic Cleaner
- Pipette
- Microtome
- Medical Hand Sink
- Medical Freezer
- Blood Bank Refrigerator
- Medical Pharmacy Refrigerator
- Analysis Balance
- Medical Destroyer
- In-Vitro Diagnostics
- Hemodialysis Equipment
- Hospital Furniture
- Walking Aids
- First-Aid Products
- Medical Endoscope
- Medical Human Model
- Ophthalmic Equipment
- Dental Equipment
- ENT Equipment
- Home Care Equipment
- Veterinary Equipment
- Medical Consumables
- Personal Protective Equipment
I. Clinical Application
Oral and maxillofacial cone beam computed tomography equipment
(dental CT) with 12cmX15cm flat panel detector, can be widely used in
oral and maxillofacial surgery, orthodontics, orthognathic surgery,
implant, dental, temporomandibular joint Preoperative and postoperative.
II. Performance Characteristics
1. Using the world's top high-end flat panel detector, high resolution,
small distortion, uniform brightness.
2. Use exposure mode, only when needed to activate the X source. During the rotation of the 18s, the rays last only 4-8s. The effect of reducing the check dose, reached the international advanced level.
3. 3000A proprietary three-dimensional reconstruction algorithm, the original two-dimensional sequence projection into a three-dimensional volume image, you can at any angle, any location to provide high-definition tomography.
4. through the three-dimensional volume image extraction of oral panorama, can provide high-definition panoramic images.
5, the image can be used to generate reports, print or save as a report file.
6, can provide standing, sitting and wheelchair and other kinds of film.
III. Standard Configuration
1、Main Frame
1 set
2、High Frequency High Voltage X-ray
Generator
1 set
3、19 inch color ordinary LCD monitor
1 set
4、12cmX15cm flat panel detector
1 set
5、Digital Acquisition Processing
Workstation
1 set
6、Electrically adjustable collimator
1 set
7、Graphical LCD touch screen
1 unit
8、Wall-mounted control box
1 unit
9、Electrical control cabinet
1 unit
10、Printer (optional)
1 set
IV. Technical Specifications
|
PARAMETER |
SPECIFICATION |
|
|
Technical indicators |
Anode voltage: 60-92 kV |
|
|
anode current: 1-15 mA. |
|
|
|
Maximum output power: 1.38kw |
|
|
|
parameter adjustment range: 60 ~ 92KV 1 ~ 15mA |
|
|
|
Information display: KV, MA, lifting position information, human characteristics, laser indication and positioning |
|
|
|
X-ray tube |
X-ray Tube Model: D-054SB (Toshiba) |
|
|
Focus: 0.5 |
|
|
|
Heat capacity: 35kJ (50kHU) |
|
|
|
photography mode: cone beam CT |
|
|
|
Image system Thales flat panel detector 650HD-E |
image receiving size: 12cmX15cm flat panel detector |
|
|
pixel size: 150 |
|
|
|
A / D conversion depth: 14bit |
|
|
|
Acquisition mode: pulse mode |
|
|
|
Detector Type: CMOS |
|
|
|
Pixel matrix: 960 * 786 |
|
|
|
Limit resolution up to: two-dimensional ≥ 3.1 lp / mm |
|
|
|
Structural Performance |
Column lift stroke: 1000mm |
|
|
Lifting noise: <70dB (with buzzer sound) |
|
|
|
Collision protection: Yes |
|
|
|
Weight: 260kg |
|
|
|
Dimensions: 788mm (width) X 1090mm (length) X 2200mm (height) |
|
|
|
Power requirements: 220V / 50HZ / 2kVA |
|
|
|
Space requirements: the required area of 5 square meters, unilateral 2 meters |
|
|
|
The camera room should have a protective thickness of 2 mm lead |
|
|
|
Electrical control device size: width 340mm, depth 550mm, height 650mm |
|