Products

ADM-3000A

Dental Cone Beam Computed Tomography System

I. Clinical Application

Oral and maxillofacial cone beam computed tomography equipment

(dental CT) with 12cmX15cm flat panel detector, can be widely used in

oral and maxillofacial surgery, orthodontics, orthognathic surgery,

implant, dental, temporomandibular joint Preoperative and postoperative.

II. Performance Characteristics

1. Using the world's top high-end flat panel detector, high resolution,

small distortion, uniform brightness.

2. Use exposure mode, only when needed to activate the X source. During the rotation of the 18s, the rays last only 4-8s. The effect of reducing the check dose, reached the international advanced level.

3. 3000A proprietary three-dimensional reconstruction algorithm, the original two-dimensional sequence projection into a three-dimensional volume image, you can at any angle, any location to provide high-definition tomography.

4. through the three-dimensional volume image extraction of oral panorama, can provide high-definition panoramic images.

5, the image can be used to generate reports, print or save as a report file.

6, can provide standing, sitting and wheelchair and other kinds of film.

III. Standard Configuration

1Main Frame

1 set

2High Frequency High Voltage X-ray Generator

1 set

319 inch color ordinary LCD monitor

1 set

412cmX15cm flat panel detector

1 set

5Digital Acquisition Processing Workstation

1 set

6Electrically adjustable collimator

1 set

7Graphical LCD touch screen

1 unit

8Wall-mounted control box

1 unit

9Electrical control cabinet

1 unit

10Printer (optional)

1 set














IV. Technical Specifications

PARAMETER

SPECIFICATION

 

Technical indicators

Anode voltage: 60-92 kV

 

anode current: 1-15 mA.

 

Maximum output power: 1.38kw

 

parameter adjustment range: 60 ~ 92KV 1 ~ 15mA

 

Information display: KV, MA, lifting position information, human characteristics, laser indication and positioning

 

X-ray tube

X-ray Tube Model: D-054SB (Toshiba)

 

Focus: 0.5

Heat capacity: 35kJ (50kHU)

 

photography mode: cone beam CT

 

Image system Thales flat panel detector 650HD-E

image receiving size: 12cmX15cm flat panel detector

 

pixel size: 150

 

A / D conversion depth: 14bit

 

Acquisition mode: pulse mode

 

Detector Type: CMOS

 

Pixel matrix: 960 * 786

 

Limit resolution up to: two-dimensional ≥ 3.1 lp / mm

 

Structural Performance

Column lift stroke: 1000mm

 

Lifting noise: <70dB (with buzzer sound)

 

Collision protection: Yes

 

Weight: 260kg

 

Dimensions: 788mm (width) X 1090mm (length) X 2200mm (height)

 

Power requirements: 220V / 50HZ / 2kVA

 

Space requirements: the required area of 5 square meters, unilateral 2 meters

 

The camera room should have a protective thickness of 2 mm lead

 

Electrical control device size: width 340mm, depth 550mm, height 650mm

 



Copyright © 2001-2024 ARI Medical Technology Co., Ltd. - ARI Technology Group Co., Ltd. All Rights Reserved.