Products
-
- Operating Theatre Equipment
- OB/GYN Equipment
- Diagnostic Equipment
- Sterilizer (Autoclave)
- X-ray Series
- Laboratory Equipment
- Biological Microscope
- Spectrophotometer
- High Speed Centrifuge
- Low Speed Centrifuge
- High Speed Freeze Centrifuge
- Low Speed Freeze Centrifuge
- Special Centrifuge
- Thermostatic Bath
- Laboratory Shaker
- Laboratory Mixer
- Water Distiller
- Magnetic and Electric Stirrer
- Laboratory Incubator
- Dry Oven
- PH Meter
- Biological Safety Cabinet
- Clean Workbench
- Water Purifier
- Ultrasonic Cleaner
- Pipette
- Microtome
- Medical Hand Sink
- Medical Freezer
- Blood Bank Refrigerator
- Medical Pharmacy Refrigerator
- Analysis Balance
- Medical Destroyer
- In-Vitro Diagnostics
- Hemodialysis Equipment
- Hospital Furniture
- Walking Aids
- First-Aid Products
- Medical Endoscope
- Medical Human Model
- Ophthalmic Equipment
- Dental Equipment
- ENT Equipment
- Home Care Equipment
- Veterinary Equipment
- Medical Consumables
- Personal Protective Equipment
Application range
This equipment is used for drying, baking and disinfection in industrial and mining companies, chemical laboratories, R&D institutions, taking into account that it is manufactured in accordance with international safety standards.
Structure Characteristics
Outer shell material: cold-rolled steel sheet surface with surface finished in satin-baked paint with sanitary gloss
Inner material: SUS304 stainless steel with polished surface sanitary finish, hot air circulation system.
Digital temperature control using microprocessor PID, precise and reliable with end-of-time warnings programmed on front panel and process parameter set problems.
Timer displayed on panel with range: 0-9999min
Parameters of automatic saving system, protection against overheating through an adjustable thermostat from 30 to 250 degrees Celsius and a temperature sensor inside the internal chamber, high temperature alarm visual and acoustic LED-type on front panel with automatic heating cut-off and cut-off warning of electric power with automatic start after a power interruption.
Rounded inner design with corners allowing easy cleaning and disinfection.
Enlarged shelves with support capacity for 02 slotted trays included with the equipment
Equipment with minimal parts that require maintenance, thus facilitating the technician's work.
Exterior viewing window and no interior glass door with tight seal with interlocking handle to secure door closure.
Stainless steel tube heater for equipment that has excellent insulation and through its forced aeration system with homogenization of the entire chamber, rapid preheating temperatures are achieved, obtaining short material sterilization times.
Optional device
RS485 communication serial port
Micro pinhole printer
RS485 to USB transfer interface
Model Specifications
|
Model |
GRF-9023A |
GRF-9053A |
GRF-9063A |
GRF-9073A |
GRF-9123A |
GRF-9203A |
|
Temperature Range |
Room Temperature +10 º C -250 º C |
|||||
|
Temperature Fluctuation |
±1℃ |
|||||
|
Temperature Uniformity |
≤Max working temperature ±2.5% |
|||||
|
Inner Cyclic Mode |
Forced convection |
|||||
|
Alarm Type |
Over temperature alarm, Timing alarm and Temperature probe damage alarm |
|||||
|
Temperature Controller |
LCD display and P.I.D. temperature controller |
|||||
|
Work Room Dimension WxDxH (cm) |
30*30*28 |
42*37*35 |
40*40*38 |
45*45*45 |
55*36*55 |
60*55*64.5 |
|
Capacity(L) |
25 |
54 |
60 |
91 |
108 |
212 |
|
Outline Dimension WxDxH (cm) |
58*50*45 |
71*56*53 |
70*70*58 |
74*64*63 |
83*61*72 |
88*74*82 |
|
Shelves |
2 |
2 |
2 |
2 |
2 |
2 |
|
Rated Power (W) |
650 |
1000 |
1200 |
1500 |
1600 |
2450 |
|
Power |
1Φ 220V 50Hz |
|||||