0
Your position：Home> Products>Sterilizer (Autoclave)>Washer Disinfector

Products

AWD-X360

Automatic Washer-disinfector

Add to Enquiry ListCall for Price

Application

Suitable for hospital endoscope, scalpel, hemostatic forceps, endoscopic biopsy forceps, tweezers, injection needles, various size syringes, test tubes, glass flakes, dressing changing bowls, various plates, buckets, pressure gauges, and other radioactive, polluting, mass, etc. High cleanliness, fast, efficient, safe and economical, automatic cleaning, disinfection and drying.

Technical Parameters

Cleaning capacity: 357L

Spray electric power: 1.6kVA

Wind voltage power: 2.2kVA

Water heating power: 20kVA

Drying and heating electric power: 6kVA

Power: 31KVA

Drying temperature: 90℃

Disinfection temperature: 93℃

Cleaning rack layer number: 4

Number of baskets: 8

Clean the car in and out: Manual control in and out

Working noise: ≤75dB

Water pressure 0.20Mpa-0.50Mpa

Supply voltage: 3N~380V, 50Hz

Outline dimension: H2060, L950mm, W825mm

Cleaning tank dimensions: 627mm×595mm×980mm

Characteristics

1.    Pre-cleaning function: automatic irrigation function, medium heat disinfection function, chemical disinfection function, rust removal function, rinsing function, drying function, automatic addition of cleaning agent and quick drying oil agent and self-setting of dosage.

2.    Simple operation: the PLC/color touch screen control system is adopted, the man-machine interface is simple to operate, and the physical parameters can be set directly through the touch screen to realize the customer's personalized demand.

3.    Printing system: high-performance heat sensitive printing technology, the cleaning and disinfection process of time, temperature and other parameters can be printed out in real time. The printing record can be saved for a long time.

4.    Fast time: enzyme cleaning takes only 25 minutes to complete the cleaning operation.

5.    Open door mode: double door design, distinguish clean area from unclean area.

6.    Circulating pump: select original imported circulating pump.

7.    Excellent loading capacity: can clean 8 standard DIN baskets at a time.

8.    Fault self-examination and diagnosis function: system equipment safety self-test fault diagnosis function to ensure the safety of equipment operation.

9.    Bulkhead: stainless steel 304 cabin.

Structure Composition

It consists of cleaning sterilizer, frame, casing, sprinkler system, cleaning car, caster, heating system, drying system, solenoid valve, circulating pump, peristaltic pump, fan, control system, touch screen, printer and pipeline.

Cleaning Process (6 modules)

1.    Enzyme rapid cleaning

-Process: Cleaning, First rinse, Second rinse

-Applicable instrument: Device cleaning for high temperature resistance and no need for drying

-Points for attention: providing softened water, pure water or distilled water can improve the quality of cleaning.

2.    Standard cleaning

-Process: Cleaning, First rinse, Second rinse, Hot rinsing, Dry

-Applicable instruments: for metal instruments and non-heat-resistant disinfectant cleaning instruments

-Note: provide softened water, pure water or distilled water can improve the quality of cleaning. Adding Lubricant can avoid Watermark in drying process.

3.    Thermal disinfection cleaning

-Process: Pre-cleaning, Cleaning, First rinse, Second rinse, Hot rinsing, Dry

-Applicable instruments: used for metal instruments and instruments requiring high temperature disinfection and cleaning

-Note: provide softened water, pure water or distilled water can improve the quality of cleaning. Adding Lubricant can avoid Watermark in drying process.

4.    Chemical cleaning

-Process: Pre-cleaning, Cleaning, First rinse, Disinfect, Second rinse, Hot rinsing, Dry

-Applicable equipment: used for cleaning high temperature equipment and rubber, plastic equipment.

-Note: provide softened water, pure water or distilled water can improve the quality of cleaning. Adding Lubricant can avoid Watermark in drying process.

5.    Fast heat disinfection and cleaning

-Process: Cleaning, Hot rinsing, First rinse, Second rinse, Drying

-Applicable instruments: used for metal instruments and instruments requiring high temperature disinfection and cleaning

-Note: provide softened water, pure water or distilled water can improve the quality of cleaning. The addition of lubricant can prevent the watermark from being produced in the drying process.

6.    Dry

-Process: drying (90℃, 20min)

-Applicable instruments: for metal instruments and equipment requiring high temperature drying

-Attention: change medicine bowl, waist plate and other containers should be put upside down to ensure the quality of drying.

Device Loading

1.      There should be a certain gap between the apparatus and the other, and they should be arranged evenly. The connecting parts of the apparatus should be removed as far as possible, so that all the external surfaces of the apparatus leak out and are not blocked, so that the instrument does not protrude out of the bottom of the instrument basket so as not to obstruct the movement of the nozzle. Rotate the spray arm with your hand when necessary to check if it works well.

2.      For some larger instruments such as: dressing bowl, waist plate, square tray, etc., can be removed from the bracket, replaced with a plug card cleaning.

3.      After the equipment is placed, push the instrument car into the machine. After checking, close the door.

Copyright © 2001-2024 ARI Medical Technology Co., Ltd. - ARI Technology Group Co., Ltd. All Rights Reserved.