AWP-III Water Purifier-Water Purifier, Quality Medical Equipment from China-ARI Medical Equipment of High Quality - ARI Medical Technology Co., Ltd.

Water Purifier

Specifications

MODEL		AWP-III 15	AWP-III 30
Display		LCD
Water Output Type		RO and DI Water
Water Output Speed		15L/H	30L/H
Purifying Procedure		PF+AC+RO+DI
Water Supply Requirement		Tap water:TDS<200 ppm,5~45°C,1.0-4.0kgf/cm2 (If inlet TDS＞200ppm,extra pretreatment filter is recommended)
Purification system	Pretreatment unit	PP filter×1, Special spun fiber filter×2		5um PP deep filter Special active carbon filter×2
	RO unit	100GPD RO membrane×1	200GPD RO membrane×1
	Subsequent unit	Deionization purification column (Imported resin) ×2	Deionization purification column (Imported resin) ×3
Pure water quality	Ion rejection rate	97%~99% (New RO membrane)
	Organic rejection rate	＞99%,when MW＞200 Dalton
	Resistivity	15-18.2MΩ.cm
	Particles and bacteria rejection rate	＞99%
	Resistivity	15~18.2MΩ.cm
	Conductivity	0.055-0.067μs/cm
Control Svstem		Automatic electronic pressure sensor controlling, RO membrane auto flushing Automatic stop when water supply shortage Automatic stop when water tank full Automatic cutting off water when pump stop 24 hours non-stop work
Flow rate		2.0 Liters/min (when there is water in the water tank)
Water Quality Monitor		TDS/conductivity test pen
Consumption		72W
Power supply		AC220V,50/60Hz(Standard);AC110V,60HZ(Optional)
External Size (H×W×D)		410220420mm
Package size (H×W×D)		600490580mm
Gross Weight		35kg
Standard configuration		Main body (include 1 set of purification column) + 15L water tank + TDS/conductivity test pen + accessory pack